A tale of two Chouts

The Ultimate Indian Motocycle Hybrid, the marriage of a vintage Scout frame with a Chief engine!


The Alchemist

The essence of motocycle, picture a rigid framed vintage roadracer, leaf sprung fork, single pan saddle, hand gearchange, foot clutch, left hand throttle and the biggest production Indian engine of the time shoehorned into the best handling Indian frame of All time! A true hotrod, the looks of a stripped down wall bike on steroids!


Saturday 15 January 2011

Back on the motor build..........

or, to be more truthful stripping it down again so I can sort out a couple of issues. I need to replace one cam follower post, also want to do the late model Chief oil scraper conversion. Sometimes, the only way forward is a couple of steps back!

Thursday night I picked up my newly made timing pinion puller from Richi Foss's workshop, made to drawings done based on Neil's pinion puller. Pinion off now, ready to split the cases

2 comments:

  1. Have you seen this tool for installing the pinion gear? I don't know who makes it but its sure makes installing safer and easier.
    http://www.landracing.com/forum/index.php?PHPSESSID=099a80a860386d93107f58f3a2ca7f84&topic=5849.30

    ReplyDelete
  2. Thanks for the link Charlie, just spent the evening reading through Lars' build thread, great work! Looks like a handy tool, I assume it threads onto the end of the pinion shaft and the nut forces the pinion on. Not sure what the fitting at th etop of the shaft is for. I think Lars might have borrowed it from Moen at IPE.

    ReplyDelete